Standing Separation Devices

All MTF separation attachments are also available as standing devices with a separate base. This makes it easier still to use them with different production machines or conveyor belts.

Place, plug in, done.

Multi Separator


MTF Technik Fördertechnik - Standing separator Type MSL 600

Standing separator Type MSL 600

Standing separator Type MSL 600

With the use of the screw separator "MSL / MSR," the larger parts of the items to be separated are moved to the side with the help of the screw. Smaller pieces slide out between the height-adjustable outlet slide and the screw roller.

  • Separator lengths of 600 mm and 800 mm as standard
  • Screws available in a variety of materials with different screw surfaces and heights
  • Simple adjustment of the separation gap with knurled nuts
  • Speed adjustable at seven levels from 15 to 95 rpm
  • Overload protection prevents piece jams and injuries to operating personnel
  • Low energy use due to efficient planetary gear drive
  • Polyester scraper above the screw prevents accidental skipping of pieces or sprues
  • Adjustable spikes for easier separation of pieces
  • Telescoping base, easily adjustable in height and angle
  • Wheels with locks for stability

MTF Technik Fördertechnik - Standing separator Type MS 600

Standing separator Type MS 600

Standing separator Type MS 600

In addition to separation, the devices - depending on the task - are also suited to piece isolation and piece counting. The screw queues the pieces behind one another so that they fall individually through a special counting sensor. Depending on the piece geometry, as many as 90 pieces per minute can be safely counted in this way.

  • Significantly more cost-effective than a scale for measuring quantity
  • No weighing of differing pieces necessary, since pieces are counted regardless of form.
  • Unlike a scale, not sensitive to environmental influences (vibrations, draughts, etc.)
  • Separation and counting with one device
  • Drive uses a drum motor with independent speed control - allows connection to a parent control for fine measurement

MTF Technik Fördertechnik - Standing wheel separation device Type SESSA 600-3

Standing wheel separation device Type SESSA 600-3

Standing wheel separation device Type SESSA 600-3

With the disk separator, the longer pieces are carried over the disk rollers to the separator outlet, while the smaller pieces fall through the many available separation gaps.

  • Separator lengths of 600 mm and 800 mm standard
  • Number and spacing of the disk segments adjustable depending on the spectrum of pieces to be separated
  • Drum motor drive with seven speed steps between 15 and 95 rpm and integrated overload protection
  • Distance between the fully equipped disk rollers adjustable in seconds
  • Moveable base with telescoping aluminium profiles for easy height and angle adjustment

MTF Technik Fördertechnik - Screw Separator Multi-Separator MSL 800

Screw Separator Multi-Separator MSL 800

Screw Separator Multi-Separator MSL 800

For an easy and repeatable allocation of boxes, MTF offers a special underframe.

  • Height-adjustable box pick-ups für good parts and runners
  • Customer-specific layout of the device

MTF Technik Fördertechnik - Multi-Separator MSL 800

Multi-Separator MSL 800

Multi-Separator MSL 800

Multi-Separators can be applied in the die casting industry, as well.

  • All parts in contact with the product are made of stainless steel
  • The drive unit is equipped with an intelligent overload protective device